Tag: firmware

Flashing Yi 1080p Home Camera with custom firmware 2020 edition (ALLWINNER Chipset)

There are other guides on flashing the yi home camera, so I’m not going to reinvent the wheels.

This guide is for Yi 1080p home cameras that’s been manufacturerd in 2020, you will need the Yi-hack ALLWINNER edition.

The installation are the same as other Yi-hacks.

To check if you have the ALLWINNER version, look at the back of the camera and you should see a small sticker.

CameraFirmwareFile prefixRemarks
Yi 1080p Home 9FUS8.2.0*y20ga–
Yi 1080p Home BFUS8.2.0*y20ga–
Yi 1080p Home 9FUS8.3.0*y25ga–

You will need this version if it is 9FUS, or BFUS.

That’s all for this guide.

Flashing Riverbed Ex-560 to R210 ii BIOS & Password & IDRAC6 resets

  1. Use Rufus to make a bootable freedos USB
  2. Download the latest r210ii bios – https://dl.dell.com/FOLDER04826304M/1/PER210II_020900.exe and put it on the USB you just made
  3. Boot the server up and boot to the USB
  4. Execute the following 
per210ii_020900 -wipeclean -forcetype

Your server should now be flashing and it will reboot shortly

If you need to have the password for the BIOS and the IDRAC password reset , then you will need to open up the case. Locate the CMOS battery and then change the following jumper (at 7 oclock position of the battery and right of the four colour plug).

Power on the server and all the password should be gone.

Revert the jumper back to original position once done.